Teach you maintenance tips will save fuel in the end

　　Insufficient air pressure will increase the friction between the tire and the ground and increase fuel consumption, so you should always check the tire pressure, different models and tires have different air pressure standards。In addition, if the tire wear is serious, there will be skidding phenomenon, and will increase fuel consumption, and replace the tire if necessary。

　　2.Always check the brake system

　　Some cars will have a slight drag brake, which is equal to increasing the load of the car when driving, and will increase fuel consumption, so it is necessary to check regularly。

　　3.Regular maintenance, replacement parts

　　Air filters, gasoline filters, oil filters, etc., need to be replaced every 5,000 kilometers or more, because air filter blockage will cause a reduction in gas volume, resulting in inadequate gasoline combustion and reduced fuel efficiency。The wear of the clutch disc, the clutch pressure plate, and the use of the spark plug for too long will also increase fuel consumption, so it should be replaced regularly。

　　4.Lighten the load

　　Statistics show that each increase of 1000 grams of load will increase fuel consumption by 1%, so try to reduce the unused debris in the trunk。

　　Driving skill

　　1.Light fuel, light brake, early brake

　　Driving hard brake, fast start, fast accelerator are fuel saving taboo。The fuel saving test shows that the gas pedal to the end costs two to three times more fuel than the medium speed。Therefore, the range of stepping on the accelerator should be appropriately reduced under the premise of ensuring the normal running of the car。When you see the red light on or exit the highway, you can gently step on the brake in advance to slow down and use the remaining power of the engine to allow the vehicle to glide forward。

　　2.Warm up before accelerating

　　Running an engine at a cold temperature costs more fuel than running it at a warm temperature, so don't speed up immediately when you start, but slow down for a few minutes and let the engine warm up before accelerating。

　　3.Shift timing and gear selection

　　Shift time as far as possible to choose between 2500-3000 RPM, so as to ensure the premise of power supply, get a better economy。To eliminate low speed, driving a manual transmission car, the speed should be changed to high gear in time after the stability;When driving a car with an automatic transmission, try to avoid using the "sport" mode。

　　4.Grasp the economic speed of the vehicle

　　Economic speed refers to the fuel saving speed, the economic speed of various models is different, to carefully read the vehicle manual, but generally will be about 70-90 km/h。Below or above this speed, fuel consumption will rise。

　　5.Pay attention to the new car run-in period

　　Whether the driving method is correct in the running-in period has a great impact on the fuel economy of the engine in the future。Therefore, we must keep in mind the driving principle of the new car running-in period that does not exceed 80 kilometers per hour and the speed does not exceed 4000 RPM, and do not break the rule。

                                                                             We have a high quality sales team to serve you wholeheartedly 

                                                                          Sales hotline: 0722-3330988 13872881898

                                                                                 Suizhou city Junlong special vehicle Co., LTD

----------------------------------------------------------------------------------------------------------------